Menu
Your Cart
Our order fulfillment operations will remain suspended on 29th and 30th March 2024 for FY Closing. Any order placed after 2 PM on 28th March will be shipped on 1st April 2024. 

10 DOF IMU Sensor, Low Power

10 DOF IMU Sensor, Low Power
10 DOF IMU Sensor, Low Power
10 DOF IMU Sensor, Low Power
10 DOF IMU Sensor, Low Power
10 DOF IMU Sensor, Low Power
10 DOF IMU Sensor, Low Power
10 DOF IMU Sensor, Low Power
10 DOF IMU Sensor, Low Power
WaveShare Electronics
10 DOF IMU Sensor, Low Power
₹​2,295.10
₹​1,945.00 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 19
B2B GST Credit Available

10 DOF IMU Sensor (C) is good at motion monitor, as well as detecting/measuring the position, height, and temperature. It would be helpful for making your own copter or balancing robot, provides great man-machine interaction.


Features

  • MPU9250: 3-axis gyroscope, 3-axis accelerometer, and 3-axis compass/magnetometer

Internal Digital Motion Processing™ (DMP™) engine, offloads complicate fusion calculation, sensor synchronization, gesture recognition, etc.

Comparing with MPU6050, it is lower power consumption, and more suitable for wearable devices

  • BMP280: barometric pressure sensor

Embedded temperature sensor for temperature compensation

Comparing with BMP180, it is lower power consumption, and higher performance

  • You can get the 10 DOF data through I2C interface


Resources

User Manual


Specifications

  • Power: 3.3V~5.5V (internal voltage regulation with low dropout)
  • Accelerometer

Resolution: 16 bit

Measurement range (configurable): ±2, ±4, ±8, ±16g

Operating current: 450uA

  • Gyroscope

Resolution: 16 bit

Measurement range (configurable): ±250, ±500, ±1000, ±2000°/sec

Operating current: 3.2mA

  • Compass/Magnetometer

Resolution: 14bit

Measurement range: ±4800µT

Operating current: 280uA

  • Barometric pressure sensor

Barometric resolution: 0.0016hPa

Temperature resolution: 0.01°C

Measurement range: 300~1100hPa (altitude: +9000m ~ -500m)

Barometric relative accuracy (700hPa~900hPa, 25°C~40°C): ±0.12hPa (±1m)

Operating current (1Hz update rate, ultra-low power mode): 2.8uA


Interface

PIN NO.SYMBOLDESCRIPTION
1VCC3.3V~5.5V power supply
2GNDpower ground
3SDAI2C data pin
4SCLI2C clock pin
5INTMPU9250 digital interrupt output
6FSYNCMPU9250 frame sync signal

Write a review

Note: HTML is not translated!
Bad Good
Captcha