WaveShare Electronics
₹784.75 + 18% GST
B2B GST Credit Available
1.54inch OLED Display Module, 128×64 Resolution, SPI / I2C Communication - White
1 Pin - Male to Female Jumper Wire - 12 Inch/30.5cm - Pack of 100 PCS Description : These wires are commonly used for prototy..
₹454.30
Ex Gst ₹385.00
1 Pin Female to Female Jumper Wire - 12 Inch - Mixed ColorDescription : These wires are commonly used for prototyping. This&n..
₹9.44
Ex Gst ₹8.00
F-F Jumper Wire - Set of 40 - 2.54mm - 20cm LengthSet of 40 jumper wires with female connector at both ends. Allow you to easily prototype with ..
₹57.82
Ex Gst ₹49.00
F-M Jumper Wire - 20cm Length - 2.54mm - Set of 40Set of 40 jumper wires with female connector at one end and male connector on other. Allo..
₹57.82
Ex Gst ₹49.00
Male to Male Jumper Wires - 1 Pin - Set of 65 Wires - Mix colors - Mix LengthThis is a set of 65 pcs male-to-male high-quality jumper wires cables..
₹93.22
Ex Gst ₹79.00
Male to Male Jumper Wires - 20cm Length - 2.54mm - Set of 40 Set of 40 jumper wires with male connector at both ends. Allow you to..
₹57.82
Ex Gst ₹49.00
2 Pin Shunt - 2.54mm Pitch - Jumper Cap - Yellow ColorPackage Includes : 10x Yellow Jumper Cap 2.54mm
Position
2 Pin
..
₹29.50
Ex Gst ₹25.00
Duracell CR2032 3V Lithium Coin Cell BatteryThe Duracell CR2032 3V Lithium Coin Cell Battery is a reliable and widely used power source for various el..
₹40.00
Ex Gst ₹33.90
400 Tie Points - Solderless BreadboardHigh Quality breadboard with power lanes and printed top face for easy prototyping.Specifications..
₹57.82
Ex Gst ₹49.00₹926.00
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 8
B2B GST Credit Available
Price in reward points: 785
- Stock: 0 in Stock
- SKU: 25512
- Delivery Time
- Bulk & B2B RFQ
- HSN Code: 84733099
1.54inch OLED Display Module, 128×64 Resolution, SPI / I2C Communication - White
This is a 1.54-inch OLED module - White, a built-in SSD1309 driver chip, using the SPI/I2C interface communication, provides Raspberry Pi, Arduino, STM32, ESP32, Jetson Nano, and other demo information.
User Manual / Datasheet / Example Codes Etc.
Features
- Onboard voltage translator, compatible with 3.3V / 5V MCUs
- Adopts 4-wire SPI and I2C interfaces, better compatibility, fast data rate
- Comes with online development resources (examples for Raspberry Pi/Arduino/STM32/ESP32/Jetson Nano)
Specifications
- OPERATING VOLTAGE : 3.3V / 5
- DISPLAY PANEL : OLED
- RESOLUTION : 128 × 64 pixels
- PIXEL SIZE : 0.25 × 0.25 mm
- COMMUNICATION INTERFACE : 4-wire SPI / I2C
- DRIVER : SSD1309
- DISPLAY SIZE : 35.05 × 17.52mm
- MODULE SIZE : 43.00 × 37.50mm
Package Includes
- 1x 1.54inch OLED Module
- 1x GH1.25 7PIN cable
1.54inch OLED Display Module
Embedded SSD1309 Driver Chip, SPI / I2C Communication
Control Interface
- VCC : Power (3.3V / 5V input)
- GND : Ground
- DIN : Data input
- CLK : Clock input
- CS : Chip selection, low active
- DC : Data/Command selection (high for data, low for command)
- RST : Reset, low active
Hardware Connection
Connecting With Raspberry Pi Via SPI Interface
Connecting With Arduino Board Via SPI Interface
Usage Example
Outline Dimensions
