Menu
Your Cart

1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface

1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
WaveShare Electronics
1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface
₹​1,473.82
₹​1,249.00 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 12
B2B GST Credit Available
Price in reward points: 1249

1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface

This is a 1.27inch RGB OLED Display Module, 128×96 Resolution, 262K Colors, SPI Interface. The 1.27inch RGB OLED Module Comes with SPI interface with 262K colors, Driver SSD1351, Which Support Raspberry Pi/Arduino/STM32 and Etc.


User Manual / Datasheet / Example Codes Etc.


Features

  • 128×96 resolution OLED display, 262K colors, clear and colorful displaying effect
  • SPI interface, minimizes required IO pins
  • Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)


Specifications

  • OPERATING VOLTAGE : 3.3V / 5V
  • RESOLUTION : 128 × 96 pixels
  • COMMUNICATION INTERFACE : 3/4-wire SPI
  • DISPLAY SIZE : 25.708 × 19.28mm
  • DISPLAY PANEL : OLED
  • PIXEL SIZE : 0.047 × 0.185mm
  • DRIVER : SSD1351
  • MODULE SIZE : 42.2 × 29.0mm





Control Interface


  • RES Reset, low active
  • DC Data/Command selection (high for data, low for command)
  • CS Chip selection, low active
  • CLK Clock input
  • DIN Data input
  • GND Ground
  • VCC Power (3.3V / 5V input)



Usage Example




Dimemsions


Write a review

Note: HTML is not translated!
Bad Good
Captcha
Tags: RGB , OLED , Display