Menu
Your Cart
Our order fulfillment operations will remain suspended on 29th and 30th March 2024 for FY Closing. Any order placed after 2 PM on 28th March will be shipped on 1st April 2024. 

264x176, 2.7inch E-Ink/ E-Paper display HAT for Raspberry Pi

264x176, 2.7inch E-Ink/ E-Paper display HAT for Raspberry Pi
264x176, 2.7inch E-Ink/ E-Paper display HAT for Raspberry Pi
264x176, 2.7inch E-Ink/ E-Paper display HAT for Raspberry Pi
264x176, 2.7inch E-Ink/ E-Paper display HAT for Raspberry Pi
WaveShare Electronics
264x176, 2.7inch E-Ink/ E-Paper display HAT for Raspberry Pi
₹​1,742.00
₹​1,476.27 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 15
B2B GST Credit Available

264x176, 2.7inch E-Ink display HAT for Raspberry Pi


This is an E-Ink display HAT for Raspberry Pi, 2.7inch, 264x176 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.


Features

  • No backlight required, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Compatible with Raspberry Pi 2B/3B/Zero/Zero W
  • Onboard 4x Keys
  • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Technical Specs

  • Operating voltage: 3.3V
  • Interface: 3-wire SPI, 4-wire SPI
  • Outline dimension: 85mm × 56mm
  • Display size: 57.288mm × 38.192mm
  • Dot pitch: 0.217 × 0.217
  • Resolution: 264 × 176
  • Display color: black, white
  • Grey level: 2
  • Full refresh time: 6s
  • Refresh power: 24mW(typ.)
  • Standby power: <0.017mW
  • Viewing angle: >170°

Development related resources at Product's Wiki page

VCC3.3V
GNDGND
DINSPI MOSI
CLKSPI SCK
CSSPI chip select (Low active)
DCData/Command control pin (High for data, and low for command)
RSTExternal reset pin (Low for reset)
BUSYBusy state output pin (Low for busy)

Write a review

Note: HTML is not translated!
Bad Good
Captcha