Menu
Your Cart

Waveshare 2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI

Waveshare 2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
Waveshare 2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
Waveshare 2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
Waveshare 2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
Waveshare 2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
Waveshare 2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
WaveShare Electronics
Waveshare 2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI
₹​1,132.80
₹​960.00 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 9
B2B GST Credit Available
10 or more ₹​1,096.22
50 or more ₹​1,047.84

2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI

This is an OLED display HAT for Raspberry Pi, 2.23inch diagonal, 128×32 pixels, with embedded SSD1305 driver, communicating via SPI or I2C interface.

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • Optional interfaces: SPI (default), or I2C, configured via onboard resistor
  • Brings control pins for host boards like Arduino/STM32
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
  • Driver: SSD1305
  • Interface: SPI / I2C
  • Display size: 2.23inch diagonal
  • Display color: white
  • Resolution: 128×32
  • Viewing angle: >160°
  • Power supply voltage: 3.3V/5V
  • Logic level: 3.3V

Development Resources - 

https://www.waveshare.com/wiki/2.23inch_OLED_HAT

 


2.23inch OLED HAT dimensions

Write a review

Note: HTML is not translated!
Bad Good
Tags: OLED , HAT , Raspberry Pi