Menu
Your Cart

CP2102 USB UART Board (mini)

CP2102 USB UART Board (mini)
CP2102 USB UART Board (mini)
CP2102 USB UART Board (mini)
CP2102 USB UART Board (mini)
CP2102 USB UART Board (mini)
CP2102 USB UART Board (mini)
CP2102 USB UART Board (mini)
CP2102 USB UART Board (mini)
CP2102 USB UART Board (mini)
CP2102 USB UART Board (mini)
WaveShare Electronics
CP2102 USB UART Board (mini)
₹​411.82
₹​349.00 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 3
B2B GST Credit Available

The CP2102 USB UART Board (mini) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.


Features

  • Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10/11...
  • Voltage output support: 5V or 3.3V
  • Integrated USB protection device: SP0503
  • 3 LEDs: TXD LED, RXD LED, POWER LED
  • Pins accessible on pinheaders: TXD, RXD, RTS, CTS
  • Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided)


Resources

User Guide

How to use

In the case of working with a MCU:

  • VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
  • GND: connects to GND
  • TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)
  • RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
  • RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)
  • CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)

Write a review

Note: HTML is not translated!
Bad Good
Captcha