Menu
Your Cart

ESP32-C3 Mini Development Board, ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 - Solder Version

ESP32-C3 Mini Development Board, ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 - Solder Version
ESP32-C3 Mini Development Board, ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 - Solder Version
ESP32-C3 Mini Development Board, ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 - Solder Version
ESP32-C3 Mini Development Board, ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 - Solder Version
ESP32-C3 Mini Development Board, ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 - Solder Version
ESP32-C3 Mini Development Board, ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 - Solder Version
ESP32-C3 Mini Development Board, ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 - Solder Version
ESP32-C3 Mini Development Board, ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 - Solder Version
WaveShare Electronics
ESP32-C3 Mini Development Board, ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 - Solder Version
₹​454.00
₹​384.75 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 4
B2B GST Credit Available
Price in reward points: 385

ESP32-C3 Mini Development Board, Based on ESP32-C3FN4 Single-core Processor, 160MHz Running Frequency, 2.4GHz Wi-Fi & Bluetooth 5 - With Pre Soldered Pin Headers


This is an 
ESP32-C3 Mini Development Board. The ESP32-C3 Mini Development Board comes with ESP32-C3FN4 Single-core Processor, 400KB of SRAM and 384KB ROM & 4MB of onboard Flash memory, Which Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE).


User Manual / Datasheet / Example Codes Etc.


Features

  • Low-power SoC equipped with RISC-V 32-bit single-core processor, up to 160MHz main frequency
  • Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE)
  • 400KB of SRAM and 384KB ROM, and 4MB of onboard Flash memory
  • Castellated module and onboard ceramic antenna, allows soldering direct to carrier boards
  • Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
  • Integrated with USB serial port full-speed controller, 15 × GPIO pins allows flexibly configuring pin functions
  • 3 × SPI, 1 × I2C, 2 × UART, 1 × I2S, 2 × ADC, etc.



ESP32-C3-Zero Development Board

Based on ESP32-C3FN4, onboard multi-function GPIO pins





Pin Definition




What's On Board


  1. USB Type-C Port
  2. BOOT button
    Press it and then press the RESET button to enter download mode
  3. RESET button
  4. WS2812 RGB LED
  1. CAT6219-330TD-GT3
    CMOS LDO, 500mA (Max)
  2. ESP32-C3FN4 single-core processor
    up to 160MHz operating frequency
  3. 2.4G ceramic antenna



Dimensions


Write a review

Note: HTML is not translated!
Bad Good
Captcha