RP2040 MCU Board, With 1.28inch Round LCD, Accelerometer And Gyroscope Sensor, With CNC Metal Case

RP2040 MCU Board, With 1.28inch Round LCD, Accelerometer And Gyroscope Sensor, With CNC Metal Case

RP2040-LCD-1.28 is a low-cost, high-performance MCU board designed by Waveshare. Although it is tiny, it incorporates a 1.28inch LCD round display, Li-ion battery charger, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope) and so on, adapting all GPIO and Debug headers, which makes it easy for you to develop and integrate it into products quickly.

User Manual / Datasheet / Example Codes Etc.

Feature

• RP2040 MCU chip designed by Raspberry Pi in the United Kingdom.
• Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz.
• 264KB of SRAM, and 2MB of onboard Flash memory.
• Type-C connector, keeps it up to date, easier to use.
• Onboard 1.28-inch 240 x 240 resolution, 65K RGB IPS LCD display for clear color pictures.
• Lithium battery recharge/discharge header, suitable for mobile devices.
• All GPIOs are adapted through 1.27 pitch female headers (There are 30 pins in total, but some pins have been connected to the internal circuit, you need to pay attention when multiplexing, please refer to the wiki for details).
• USB 1.1 with device and host support.
• Low-power sleep and dormant modes.
• Drag-and-drop programming using mass storage over USB.
• 2 x SPI, 2 x I2C, 2 x UART, 2 x UART, 4 x 12-bit ADC, 16 × controllable PWM channels.
• Accurate clock and timer on-chip.
• Temperature sensor.
• Accelerated floating-point libraries on-chip.
• 8 x Programmable I/O (PIO) state machines for custom peripheral support.

CNC Metal Case

30 × Multi-Function GPIO Pins

What's On Board

1.  USB Type-C connector

• USB 1.1 with device and host support

2.  ETA6096

• high efficiency Lithium battery recharge manager

3.  Battery Header

• MX1.25 header, for 3.7V Lithium battery, allows recharging the battery and powering the board at the same time

4.  QMI8658C

• IMU, includes a 3-axis gyroscope and a 3-axis accelerometer

5.  1.27mm pitch headers

• Adapting all GPIO and Debug pins

6.  W25Q16JVUXIQ

• 2MB NOR-Flash

7.  RP2040

• Dual-core processor, up to 133MHz operating frequency

8.  RESET Button

9.  BOOT Button

• press it when resetting to enter download mode

Dimensions