Menu
Your Cart

RP2040-LCD-0.96, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with LCD - Solder Version

RP2040-LCD-0.96, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with LCD - Solder Version
RP2040-LCD-0.96, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with LCD - Solder Version
RP2040-LCD-0.96, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with LCD - Solder Version
RP2040-LCD-0.96, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with LCD - Solder Version
RP2040-LCD-0.96, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with LCD - Solder Version
RP2040-LCD-0.96, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with LCD - Solder Version
RP2040-LCD-0.96, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with LCD - Solder Version
RP2040-LCD-0.96, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with LCD - Solder Version
WaveShare Electronics
RP2040-LCD-0.96, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with LCD - Solder Version
₹​949.00
₹​804.24 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 8
B2B GST Credit Available
Price in reward points: 804

RP2040-LCD-0.96, a Pico-like MCU Board Based on Raspberry Pi MCU RP2040, with LCD - Solder Version


RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For software development, either Raspberry Pi's C/C++ SDK, or the MicroPython is available, which makes it easy for you to get started, and integrate it into end products quickly.

In addition, there're also an onboard 0.96inch IPS display, Lithium battery recharge/discharge header, and high-efficiency DC-DC buck-boost chip.


User Manual / Datasheet / Example Codes Etc.


Features

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom.
  • Dual-core Arm Cortex M0+ processor, a flexible clock running up to 133 MHz.
  • 264KB of SRAM, and 2MB of onboard Flash memory.
  • USB-C connector, keeps it up to date, easier to use.
  • 0.96-inch 160×80 pixels 65K colorful IPS LCD display.
  • Lithium battery recharge/discharge header, suitable for mobile devices.
  • Onboard DC-DC chip TPS63000, high-efficiency DC-DC buck-boost chip, 1.8A current switch.
  • Castellated module allows soldering directly to carrier boards (there should be a dedicated cut-out for embedding the bottom components).
  • USB 1.1 with device and host support.
  • Low-power sleep and dormant modes.
  • Drag-and-drop programming using mass storage over USB.
  • 26 × multi-function GPIO pins.
  • 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels.
  • Accurate clock and timer on-chip.
  • Temperature sensor.
  • Accelerated floating-point libraries on-chip.
  • 8 × Programmable I/O (PIO) state machines for custom peripheral support.


Package Includes

  • 1x RP2040-LCD-0.96 with pre-soldered header



26 × Multi-Function GPIO Pins





What's On Board




Dimensions


Write a review

Note: HTML is not translated!
Bad Good
Captcha