2.13inch E-Paper HAT (G), 250x122, Red/Yellow/Black/White, SPI Interface

2.13inch E-Paper HAT (G), 250x122, Red/Yellow/Black/White, SPI Interface

This is a 2.13inch E-Paper HAT (G), 250x122, Red/Yellow/Black/White, SPI Interface. The 2.13inch E-paper HAT G comes with display color Red/Yellow/Black/White with spi interface and 250x122 resolution, Which support Raspberry Pi/Jetson Nano/Arduino/STM32 etc.

User Manual / Datsheet / Example Codes Etc.

Features

• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• SPI interface, for connecting with other controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
• Onboard voltage translator, compatible with 3.3V/5V MCUs
• Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

• OPERATING VOLTAGE : 3.3V/5V
• DISPLAY COLOR : Red/Yellow/Black/White
• INTERFACE : 3-wire SPI, 4-wire SPI 
• GREY SCALE : 2
• OUTLINE DIMENSIONS : 65 × 30.2mm
• FULL REFRESH TIME : 25s
• DISPLAY SIZE : 48.55 × 23.70mm
• REFRESH POWER : <10mW
• DOT PITCH : 0.1943 × 0.1942mm
• STANDBY CURRENT : <0.01uA (almost none)
• RESOLUTION : 250 × 122 pixels
• VIEWING ANGLE : >170°

Onboard SPI Control Interface

For Use With Controller Boards Like Arduino/STM32

• VCC : Power (3.3V / 5V input)
• GND : Ground
• DIN : SPI MOSI pin
• SCLK : SPI SCK pin
• CS : SPI chip selection, low active
• DC : Data/Command selection (high for data, low for command)
• RST : External reset, low active
• BUSY : Busy status output pin (high for busy)

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs

Dimensions