Menu
Your Cart

4.2inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 400×300 Pixels, Red / Black / White, SPI Interface

4.2inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 400×300 Pixels, Red / Black / White, SPI Interface
4.2inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 400×300 Pixels, Red / Black / White, SPI Interface
4.2inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 400×300 Pixels, Red / Black / White, SPI Interface
4.2inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 400×300 Pixels, Red / Black / White, SPI Interface
4.2inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 400×300 Pixels, Red / Black / White, SPI Interface
4.2inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 400×300 Pixels, Red / Black / White, SPI Interface
4.2inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 400×300 Pixels, Red / Black / White, SPI Interface
4.2inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 400×300 Pixels, Red / Black / White, SPI Interface
4.2inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 400×300 Pixels, Red / Black / White, SPI Interface
4.2inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 400×300 Pixels, Red / Black / White, SPI Interface
WaveShare Electronics
4.2inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 400×300 Pixels, Red / Black / White, SPI Interface
₹​2,602.00
₹​2,205.08 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 22
B2B GST Credit Available
Price in reward points: 2205

4.2inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 400×300 Pixels, Red / Black / White, SPI Interface

This is a 4.2inch e-Paper display module for Raspberry Pi Pico, 400 x 300 pixels, supports red, black, white colors. SPI interface.



Features

  • No backlight, keeps displaying last content for a long time even when power down.
  • Ultra-low power consumption, basically power is only required for refreshing.
  • SPI interface, requires minimal IO pins.
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs.
  • 2 x user buttons for easy interaction.


Specifications

  • Size: 4.2 inch
  • Outline dimensions (bare screen): 90.1mm × 77.0mm × 1.18mm
  • Outline dimensions (driver board): 93.5mm × 78.5mm
  • Display size: 84.8mm x 63.6mm
  • Operating voltage: 3.3V/5V
  • Communication interface: SPI
  • Pitch: 0.212 x 0.212
  • Resolution: 400 x 300
  • Display color: Red, Black, white
  • Greyscale: 2
  • Full refresh: 15s
  • Refreshing power: 38.4mW(typ.)
  • Sleep current: <0.01uA (almost 0)


Package Includes

  • 1x Pico-ePaper-4.2-B
  • 1x PH2.0 8PIN wire 20cm
  • 1x Standoff pack




Raspberry Pi Pico Header Compatibility



Onboard SPI Control Interface



        • VCC : 3.3V/5V
        • GND : Ground
        • DIN : SPI MOSI pin
        • SCK : SPI SCK pin
        • CS : SPI chip selection, low active
        • DC : Data / Command selection (high for data, low for command)
        • RST : External reset, low active
        • BUSY : Busy status output



        Onboard Voltage Translator



        Pinout Definition




        Dimensions


        Write a review

        Note: HTML is not translated!
        Bad Good
        Captcha