Menu
Your Cart
Our order fulfillment operations will remain suspended on 29th and 30th March 2024 for FY Closing. Any order placed after 2 PM on 28th March will be shipped on 1st April 2024. 

7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White

7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White
7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White
7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White
7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White
7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White
7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White
7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White
7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White
7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White
7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White
WaveShare Electronics
7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White
₹​5,897.64
₹​4,998.00 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 50
B2B GST Credit Available
Price in reward points: 4998

This is a 7.3″ E-Paper HAT (G). It is a Low Power, Wide Viewing Angle display. It works with a Paper-Like Effect Without Electricity. It is Ideal for price tags, shelf labels, and industrial instruments...



Features

  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
  • Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)


Resources

User Manual


Specifications

OPERATING VOLTAGE3.3V/5VDISPLAY COLORRed/Yellow/Black/White
INTERFACE3-wire SPI, 4-wire SPIGREY SCALE2
OUTLINE DIMENSIONS170.2 × 111.2mmFULL REFRESH TIME16s
DISPLAY SIZE160 × 96mmREFRESH POWER<85mW (typ.)
DOT PITCH0.2 × 0.2 mmSTANDBY CURRENT<0.01uA (almost none)
RESOLUTION800×480 pixelsVIEWING ANGLE>170°





Pinouts

VCCPower (3.3V / 5V input)
GNDGround
DINSPI MOSI pin
CLKSPI SCK pin
CSSPI chip selection, low active
DCData/Command selection (high for data, low for command)
RSTExternal reset, low active
BUSYBusy status output pin

Write a review

Note: HTML is not translated!
Bad Good
Captcha