







This product qualifies for Free Surface Shipping !
B2B GST Credit Available
- Stock: 0 in Stock
- SKU: 21160
- Delivery Time
- Bulk & B2B RFQ
This is a binocular camera-based board that is designed for Raspberry Pi Compute Module 4. Two IMX219 800MP cameras are integrated for the stereo vision projects. An interface expander board is optional for connecting other accessories.
Specifications
| DUAL CAMERA BASE SPECIFICATIONS | ||
|---|---|---|
| CM4 socket | suitable for all variants of Compute Module 4 | |
| Networking | Gigabit Ethernet RJ45 | |
| USB | USB 2.0 × 1 | |
| FFC connector | HDMI & PCIe & USB FFC connector × 1 | |
| GPIO FFC connector × 1 | ||
| Dual camera | pixels | 8MP |
| sensor | IMX219 | |
| resolution | 3280 × 2464 (per channel) | |
| CMOS size | 1/4 inch | |
| aperture | F2.4 | |
| focal length | 2.6mm | |
| FOV | 83/73/50 degree (diagonal/horizontal/vertical) | |
| distortion | < 1% | |
| baseline length | 60mm | |
| Video | HDMI × 1, supports 4K 30fps output | |
| Storage | MicroSD card socket for Compute Module 4 Lite (without eMMC) variants | |
| Power input | 5V/2.5A | |
| Dimensions | 85.0 × 51.5mm | |
Resources
Onboard Peripherals

- CM4 socket
suitable for all variants of Compute Module 4 - HDMI connector
supports 4K 30fps output - USB 2.0 port
for connecting sorts of USB devices - PWR & USB
USB-C connector, 5V DC power supply or USB programming port - BOOT selection
ON: CM4 will be booted from USB-C interface
OFF: CM4 will be booted from eMMC or Micro SD card
- CM4 status indicator
PWR: Raspberry Pi power indicator
ACT: Raspberry Pi operating status indicator - RJ45 Gigabit Ethernet
10/100/1000M compatible - Micro SD card slot
for connecting a Micro SD card with pre-burnt image (Lite variant ONLY) - GPIO FFC connector
for expanding 40PIN GPIO - HDMI & PCIe & USB FFC connector
for expanding HDMI1, PCIe, USB - Dual cameras
IMX219, 8MP
Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)









