Menu
Your Cart

Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4

Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
WaveShare Electronics
Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4
₹​1,176.46
₹​997.00 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 10
B2B GST Credit Available
Price in reward points: 997

Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4

This is an Nano Base Board (A) for Raspberry Pi Compute Module 4, Same Size as the CM4. CM4-NANO-A is the mini board of Raspberry Pi Compute Module 4, which is a baseboard of Raspberry Pi Compute Module 4 with a 5V/2.5A USB Type C interface.


User Manual / Datasheet / Example Codes Etc.


Specifications

  • CM4 SOCKET : suitable for all variants of Compute Module 4
  • CONNECTOR : Raspberry Pi 40PIN GPIO interface × 1
  • USB : USB 2.0 Type A interface × 1
  • CAMERA : MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector)
  • STORAGE : Micro SD card socket for Compute Module 4 Lite (without eMMC) variants
  • POWER INPUT : 5V
  • DIMENSIONS : 55 × 40mm


Package Includes

  • CM4-NANO-A x1
  • 2*20PIN color-coded straight pinheader x1




Same Size As The CM4



What's On Board


  1. CM4 socket
    suitable for all variants of Compute Module 4
  2. Power supply / Programming
    5V power supply, or used for eMMC burning
  3. Micro SD card slot
    for connecting a Micro SD card with pre-burnt image (Lite variant ONLY)
  4. CSI interface
    1 × MIPI CSI camera interface
  5. USB2.0 interface
    for connecting sorts of USB devices
  1. 40PIN GPIO interface
    suitable for connecting to various HAT modules
  2. PWR indicator
    CM4 power status
  3. ACT indicator
    CM4 working status
  4. AMS1117-3.3
  5. BOOT switch
    ON: Switch USB to Type C interface, will enter download mode when powered on (configured as a large-capacity disk through RPI boot)
    OFF: Switch USB to Type A interface, will not enter download mode when powered on (booted from eMMC or Micro SD card


Dimensions


Write a review

Note: HTML is not translated!
Bad Good
Captcha
Tags: CM4 , Raspberry pi