Menu
Your Cart

A7600E LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS

A7600E LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
A7600E LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
A7600E LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
A7600E LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
A7600E LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
A7600E LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
A7600E LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
A7600E LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
A7600E LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
A7600E LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
A7600E LTE Cat-1 HAT for Raspberry Pi, Low Speed 4G Module, 2G GSM / GPRS
₹​3,267.4
₹​2,769.0 + 18% GST
All Inclusive, Shipping Calculated at Checkout

B2B GST Credit Available

This is a LTE Cat-1/2G HAT for Raspberry Pi, Based on A7600X.


Features

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL.
  • Supports dial-up, telephone call, SMS.
  • Supports LBS base station positioning, it is able to get the approximate position info via mobile network.
  • TTS (Text To Speech) feature, texts in Chinese/English can be converted into spoken words.
  • Onboard USB interface, for testing AT Commands, network communication, and so on.
  • Onboard audio jack for sound recording, making telephone call, listening the TTS resulting speech, etc.
  • Onboard USB to UART converter, for serial debugging, or accessing the Raspberry Pi.
  • Breakout common used control pins of the A7600X module, make it easy to connect with hosts boards like Arduino/STM32
  • SIM card slot, supports 1.8V/3V SIM card.
  • TF card slot for storing data like files, audio data, etc.
  • 2x LED indicators, easy to monitor the operating status.
  • Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via 0Ω resistor jumper.
  • Baudrate: 300bps ~ 4Mbps (default: 115200bps).
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).


Resources

User Guide


Specifications

FREQUENCY BAND
LTE Cat-1LTE-FDD: B1/B3/B5/B7/B8/B20
LTE-TDD: B38/B40
2GGSM/GPRS/EDGE: 900/1800 MHz
SMS AND AUDIO
SMSSupported types: MT, MO, CB, Text, PDU
Storage: USIM card and ME (default)
Audio featureSupports echo cancellation
Supports noise reduction
OTHER
Power supply5V
Operating voltage5V / 3.3V (configured via 0Ω resistor jumper)
Operating temperature-30°C ~ 80°C
Storage temperature-45°C ~ 90°C
Dimensions56.01mm × 65.00mm


Onboard Peripherals


  1. A7600E communication module
  2. CP2102 USB to UART converter
  3. NAU8810 audio decoder
  4. TXS0108EPWR voltage translator
    translates 3.3V/5V into 1.8V
  5. MP2128DT power chip
  6. MP1482 power chip
  7. Raspberry Pi GPIO header
    for connecting with Raspberry Pi
  8. A7600 control interface
    for connecting with host boards like Arduino/STM32
  9. SIM card slot
    supports 1.8V/3V SIM card
  10. TF card slot
    for storing data like files, audio data, etc.
  11. 3.5mm earphone/mic jack
    for audio actions like making telephone call
  12. USB interface
    for testing AT Commands, network communication, etc.
  13. USB TO UART
    for serial debugging, or login to Raspberry Pi
  14. Antenna connector
  1. Module power switch
  2. Network status indicator
  3. Power indicator
  4. UART selection jumper
    A: access Raspberry Pi via USB to UART
    B: control the A7600 by Raspberry Pi
    C: control the A7600 via USB to UART
  5. PWR on/off selection jumper
    PWR - 3V3: auto startup on power-up
    PWR - D6: startup/shutdown by the Raspberry Pi D6 pin
  6. Flight mode selection jumper
    NC by default, no flight mode control pin
    Flight - D4: flight mode is controlled by the Raspberry Pi D4 pin
  7. Operating voltage selection jumper
    configured via 0Ω resistor jumper
    VCCIO - 3.3V: set operating voltage as 3.3V
    VCCIO - 5V : set operating voltage as 5V
  8. USB connector solder pads
  9. BOOT forced programming solder pads

Write a review

Note: HTML is not translated!
Bad Good