This product qualifies for Free Surface Shipping !
B2B GST Credit Available
- Stock: 0 in Stock
- SKU: 17211
- Delivery Time
- Bulk & B2B RFQ
This is a Raspberry Pi IoT driver board for e-Paper raw panels. It allows getting text/image data from IoT clouds through NB-IoT/eMTC/EDGE/GPRS network connection, and then display them on the e-Paper. Applications includes any scenario where remote refresh of display is required such as shelf display etc.
Package Includes
- e-Paper NB-IoT/GPRS HAT x1
- LTE full bands PCB antenna x1
- e-Paper Adapter x1
- 24PIN FFC x1
- 2×20PIN female pinheader x1
- RPi screws pack (2pcs) x1
Development Resources
Wiki Page - http://www.waveshare.com/wiki/e-Paper_NB-IoT_GPRS_HAT
- Onboard SIM7000E module, controlled via UART, supports NB-IoT/eMTC/EDGE/GPRS communication
- e-Paper interface, controlled via SPI, compatible with various Waveshare SPI e-Paper raw panels
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Breakout SIM7000E and e-Paper control pins, for connecting with host control boards like STM32
- 3.7V lithium battery port and charging circuit, provides power to SIM7000E module or external 3.3V system (5V system like Raspberry Pi requires another power supply)
- Onboard voltage translator, select 3.3V/5V operating voltage by switch
- Provides Windows host code (based on Alibaba Cloud), make it easy to study/develop, or integrate it into IoT applications
- Comes with development resources and manual (examples for Raspberry Pi/STM32)
- Communication interface: UART + SPI (4-wire SPI by default, switch to 3-wire SPI by soldering)
- Communication module: SIM7000E
- Quad-Band LTE-FDD B3/B8/B20/B28
- GPRS/EDGE 900/1800Mhz
- GNSS (GPS, GLONASS, BeiDou, and Galileo, GNSS antenna is required and NOT included)
- Support SIM card: NB-IoT specific card, or 1.8V/3V normal SIM card
- Power supply voltage: 5V
- Logic level: 5V / 3.3V
- Applicable battery: 3.7V lithium battery via PH2.0 connector (NOT included)
- Dimensions: 56.5mm x 65mm
Warranty Terms :
Branded products (Waveshare/ Raspberry Pi/ Radxa/ DWIN etc) are as per brand warranty terms. Generic products are eligible for replacement within 7 days of delivery based on following conditions.
Products are eligible for a replacement if there is physical damage during transit or a clear manufacturing defect. Any claim for damage/ wrong items/ replacement must be made within 48 hours of successful delivery of the product. Requests for refund of amount or exchange of product(s) will be reviewed on a case by case basis and HUBTRONICS carries final rights to take a final decision on refund, store credit or exchange.
What to take care of ?
Most of our products are technical in nature and require trained personnel to handle them. Any kind of mishandling can result in damage or malfunctioning of the product, it is not possible for us to provide a replacement or refund if the product is damaged due to technical or physical mishandling.
Who pays the return shipping cost?
Free of cost return pickup from delivery address is eligible for products categorized as manufacturing defect/ Damage in transit/ Wrong items delivered. We do not support return pickup for any B2B order or offline orders not placed on website. Buyer need to arrange return shipping for B2B orders.
What voids warranty?
Please note that replacement/ return or refund is not possible if the product is not compatible with your system/application. Please check all the technical details/ dimensions etc. before ordering and contact us for any kind of clarifications.
If product is soldered/ programmed at any point or physically altered in any way, it is not eligible for return/ replacement. If the item requires soldering for testing, please ensure that you use suitable clips or jig to test it without soldering. Any kind of soldering job makes the product ineligible for return or replacement.
Following items are not eligible for return under any circumstances
- Device Programmers / Dongles
- Soldering Consumables (Wire, Flux etc)
