SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, global band support

SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT for Raspberry Pi, global band support.

User Manual / Datasheet / Example Codes Etc.

Features

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
• Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT.
• Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo).
• Onboard USB interface, to test AT Commands, get GPS positioning data, and so on.
• Breakout UART control pins, to connect with host boards like Arduino/STM32.
• SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available).
• 2 x LED indicators, easy to monitor the working status.
• Baudrate: 300~3686400 bps.
• Common baud rate auto-negotiation: 9600/19200/38400/57600/115200 bps.
• Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).

Specifications

• Power supply : 5V
• Operating voltage : 5V / 3.3V (configured via 0Ω resistor)
• Current consumption : about 41mA (idle mode)
• Operating temperature : -40°C ~ 85°C
• Storage temperature : -45°C ~ 90°C
• Dimensions : 30.50mm × 65.00mm

Package Includes

• SIM7070G Cat-M/NB-IoT/GPRS HAT x1
• LTE Antenna x1
• GPS External Antenna (B) x1
• USB-A to Micro-B cable x1
• Standoffs pack x1

Global Band Support Of NB-IoT/Cat-M/2G

NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85

Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85

GSM/GPRS/EDGE: 850/900/1800/1900MHz

Cloud Communication

Supports Communication Protocols Including TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT

GNSS Positioning

Supports GPS, BeiDou, GLONASS, Galileo Positioning

Pinout Definition

Outline Dimensions