









WaveShare Electronics
₹349.00 + 18% GST
B2B GST Credit Available
CP2102 USB UART Board (mini)
1 Pin - Male to Female Jumper Wire - 12 Inch/30.5cm - Pack of 100 PCS Description : These wires are commonly used for prototy..
₹454.30
Ex Gst ₹385.00250 Meter Multicolor Circuit Wrapping Wire - PVC Insulated -Tinned Copper Wire - 30AWG Wrapping Wire is suitable for Flexible and insulation wrap..
₹449.00
Ex Gst ₹380.51F-F Jumper Wire - Set of 40 - 2.54mm - 20cm LengthSet of 40 jumper wires with female connector at both ends. Allow you to easily prototype with ..
₹57.82
Ex Gst ₹49.00F-M Jumper Wire - 20cm Length - 2.54mm - Set of 40Set of 40 jumper wires with female connector at one end and male connector on other. Allo..
₹57.82
Ex Gst ₹49.00Male to Male Jumper Wires - 1 Pin - Set of 65 Wires - Mix colors - Mix LengthThis is a set of 65 pcs male-to-male high-quality jumper wires cables..
₹93.00
Ex Gst ₹78.81Male to Male Jumper Wires - 20cm Length - 2.54mm - Set of 40 Set of 40 jumper wires with male connector at both ends. Allow you to..
₹57.82
Ex Gst ₹49.002 Pin Shunt - 2.54mm Pitch - Jumper Cap - Yellow ColorPackage Includes : 10x Yellow Jumper Cap 2.54mm
Position
2 Pin
..
₹29.50
Ex Gst ₹25.00Duracell CR2032 3V Lithium Coin Cell BatteryThe Duracell CR2032 3V Lithium Coin Cell Battery is a reliable and widely used power source for various el..
₹40.00
Ex Gst ₹33.90400 Tie Points - Solderless BreadboardHigh Quality breadboard with power lanes and printed top face for easy prototyping.Specifications..
₹57.82
Ex Gst ₹49.00USB Type A to B Male Cable - 30 CM Cable Length - Specially Design for ArduinoThe USB Type A to B Male Cable – 30 CM Cable Length is specifically desi..
₹35.00
Ex Gst ₹29.66₹411.82
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 3
B2B GST Credit Available
- Stock: 10 in Stock
- SKU: 8085
- Delivery Time
- Bulk & B2B RFQ
The CP2102 USB UART Board (mini) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.
Features
- Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10/11...
- Voltage output support: 5V or 3.3V
- Integrated USB protection device: SP0503
- 3 LEDs: TXD LED, RXD LED, POWER LED
- Pins accessible on pinheaders: TXD, RXD, RTS, CTS
- Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided)
Resources
How to use
In the case of working with a MCU:
- VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
- GND: connects to GND
- TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX)
- RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
- RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS)
- CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)