The built-in controller used in this LCD is ST7789VW, which is an LCD controller with 240 x RGB x 320 pixels, while the pixels of this LCD itself is 135 (H) RGB x 240 (V). There are two types of horizontal and vertical screens, so the internal RAM of the LCD is not fully used. The LCD supports 12-bit, 16-bit, and 18-bit input color formats per pixel, namely RGB444, RGB565, and RGB666 three color formats, this routine uses RGB565 color format, which is also a commonly used RGB format.
The LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster.
- 240×135 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect
- SPI interface, requires minimal IO pins
- 1x joystick and 2x user buttons for easy interacting
- Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples
|OPERATING VOLTAGE||2.6 ~ 5.5V||RESOLUTION||240×135 pixels|
|COMMUNICATION INTERFACE||4-wire SPI||DISPLAY SIZE||24.91 × 14.86mm|
|DISPLAY PANEL||IPS||PIXEL SIZE||0.1101 × 0.1035mm|
|DRIVER||ST7789||DIMENSIONS||52.00 × 25.00mm|