2.9inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 296×128 Pixels, Red / Black / White, SPI Interface

2.9inch E-Paper E-Ink Display Module (B) For Raspberry Pi Pico, 296×128 Pixels, Red / Black / White, SPI Interface

2.9inch EPD (Electronic Paper Display) Module For Raspberry Pi Pico, 296 × 128 Pixels, Black / White / Red, SPI Interface.

This display is an Active Matrix Electrophoretic Display (AMEPD), with interface and a reference system design. The 2.9” active area contains 128×296 pixels, and has 1-bit B/W/R full display capabilities. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DCDC. SRAM.LUT, VCOM and border are supplied with each panel. 

User Manual / Datasheet / Example Codes Etc.

Features

• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• SPI interface, requires minimal IO pins
• Onboard voltage translator, compatible with 3.3V / 5V MCUs
• Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)

Specifications

• Size: 2.9inch
• Outline dimensions(raw panel): 79.0mm × 36.7mm × 1.05mm
• Outline dimension(driver board): 82.0mm × 38.0mm
• Display size: 66.89mm × 29.05mm
• Operating voltage: 3.3V/5V
• Interface: SPI
• Dot pitch: 0.138 × 0.138
• Resolution: 296 × 128
• Display color: Black, White, Red
• Greyscale: 2
• full refresh time: 15s
• Refresh power: 26.4mW (typ.)
• Standby current: <0.01uA (almost none)

Package includes

• 1x Pico-ePaper-2.9-B
• 1x PH2.0 8PIN wire 20cm
• 1x Standoff pack

Raspberry Pi Pico Header Compatibility

Onboard Voltage Translator