Waveshare 2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI

2.23inch OLED display HAT for Raspberry Pi, 128×32, SSD1305, I2C, SPI

This is a 2.23inch OLED display with a controller. You can directly add it on Raspberry Pi by the 40 PIN pinheader, or connect it to another hardware platform via the IIC and SPI interfaces. The interface of 2.23inch OLED HAT is the default SPI, you can also switch to I2C by soldering the resistors on the back of the OLED.

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
• Optional interfaces: SPI (default), or I2C, configured via onboard resistor
• Brings control pins for host boards like Arduino/STM32
• Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
• Driver: SSD1305
• Interface: SPI / I2C
• Display size: 2.23inch diagonal
• Display color: white
• Resolution: 128×32
• Viewing angle: >160°
• Power supply voltage: 3.3V/5V
• Logic level: 3.3V

Development Resources - 

https://www.waveshare.com/wiki/2.23inch_OLED_HAT