WaveShare Electronics
₹4,998.00 + 18% GST
B2B GST Credit Available
7.3inch e-Paper HAT (G), 800 × 480, Red/Yellow/Black/White
₹5,897.64
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 50
B2B GST Credit Available
Price in reward points: 4998
- Stock: 2 in Stock
- SKU: 22772
- Delivery Time
- Bulk & B2B RFQ
This is a 7.3″ E-Paper HAT (G). It is a Low Power, Wide Viewing Angle display. It works with a Paper-Like Effect Without Electricity. It is Ideal for price tags, shelf labels, and industrial instruments...
Features
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)
Resources
Specifications
OPERATING VOLTAGE | 3.3V/5V | DISPLAY COLOR | Red/Yellow/Black/White |
---|---|---|---|
INTERFACE | 3-wire SPI, 4-wire SPI | GREY SCALE | 2 |
OUTLINE DIMENSIONS | 170.2 × 111.2mm | FULL REFRESH TIME | 16s |
DISPLAY SIZE | 160 × 96mm | REFRESH POWER | <85mW (typ.) |
DOT PITCH | 0.2 × 0.2 mm | STANDBY CURRENT | <0.01uA (almost none) |
RESOLUTION | 800×480 pixels | VIEWING ANGLE | >170° |
Pinouts
VCC | Power (3.3V / 5V input) |
---|---|
GND | Ground |
DIN | SPI MOSI pin |
CLK | SPI SCK pin |
CS | SPI chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | External reset, low active |
BUSY | Busy status output pin |