Menu
Your Cart
Orders placed on 12th and 13th October will be shipped on 14th October.  

0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface

0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
WaveShare Electronics
0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface
₹​1,089.00
₹​922.88 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 9
B2B GST Credit Available
Price in reward points: 923

0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface

This is an 0.96inch RGB OLED Display Module, 64×128 Resolution, 65K Colors, SPI Interface, The 0.96inch RGB OLED display module comes with 3/4-wire SPI interface with SSD1357 deiver, Which support for Raspberry Pi/Arduino/STM32 and etc.


User Manual / Datasheet / Example Codes Etc.


Features

  • 64×128 resolution OLED display, 65K colors, clear and colorful displaying effect
  • SPI interface, minimizes required IO pins
  • Comes with online development resources (examples for Raspberry Pi/Arduino/STM32)


Specifications

  • Operrating Voltage : 3.3V / 5V
  • Resolution : 64 × 128 pixels
  • Communication Interface : 3/4-wire SPI
  • Display Size : 10.862 × 21.736mm
  • Display Panel : OLED
  • Pixle Size : 0.0327 × 0.146mm
  • Driver : SSD1357
  • Module Size : 32.5 × 26.0mm





Control Interface


  • VCC : Power (3.3V / 5V input)
  • GND : Ground
  • DIN : SPI data input
  • CLK : SPI clock input
  • CS : Chip selection, low active
  • DC : Data/Command selection (high for data, low for command)
  • RST : Reset, low active




Usage Example




Dimensions


Write a review

Note: HTML is not translated!
Bad Good
Captcha
Tags: RGB , OLED , Display