Menu
Your Cart

2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128 Pixels, Black / White, SPI Interface

2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128 Pixels, Black / White, SPI Interface
2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128 Pixels, Black / White, SPI Interface
2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128 Pixels, Black / White, SPI Interface
2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128 Pixels, Black / White, SPI Interface
2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128 Pixels, Black / White, SPI Interface
2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128 Pixels, Black / White, SPI Interface
2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128 Pixels, Black / White, SPI Interface
2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128 Pixels, Black / White, SPI Interface
2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128 Pixels, Black / White, SPI Interface
2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128 Pixels, Black / White, SPI Interface
WaveShare Electronics
2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128 Pixels, Black / White, SPI Interface
₹​1,445.00
₹​1,224.58 + 18% GST
All Inclusive, Shipping Calculated at Checkout
Assured Cashback of ₹ 12
B2B GST Credit Available
Price in reward points: 1225

2.9inch E-Paper E-Ink Display Module For Raspberry Pi Pico, 296×128 Pixels, Black / White, SPI Interface

    2.9inch EPD (Electronic Paper Display) Module For Raspberry Pi Pico, 296 × 128 Pixels, Black / White, SPI Interface.

    This display is an Active Matrix Electrophoretic Display (AMEPD), with interface and a reference system design. The 2.9” active area contains 296x128 pixels, and has 1- bit B/W full display capabilities. An integrated circuit contains gate buffer, source buffer, interface, timing control logic, oscillator, DC-DC. SRAM.LUT, VCOM and border are supplied with each panel.




    Features

        • No backlight, keeps displaying last content for a long time even when power down
        • Ultra low power consumption, basically power is only required for refreshing
        • SPI interface, requires minimal IO pins
        • Onboard voltage translator, compatible with 3.3V / 5V MCUs
        • Comes with development resources and manual (Raspberry Pi Pico C/C++ and MicroPython examples)


        Specifications

        • Dimension: 2.9inch
        • Outline dimensions (raw panel): 79.0mm × 36.7mm × 1.05mm
        • Outline dimension(with driver board): 82.0mm × 38.0mm
        • Display size: 66.89mm × 29.05mm
        • Operating voltage: 3.3V
        • Interface: SPI
        • Dot pitch: 0.227 × 0.226
        • Resolution: 296 × 128 pixels
        • Display color: Black, White
        • Greyscale: 4
        • Partial refresh time: 0.6s
        • full refresh time: 3s
        • Refresh power: 26.4mW (typ.)
        • Standby current: <0.01uA (almost none)
        • Touch points: 5 (MAX)
        • Touch type: Capacitive
        • Touch interface: I2C (Address: 0x48)
        • Touch panel: Toughened glass panel


        Package Includes

        • 1x Pico-ePaper-2.9
        • 1x PH2.0 8PIN wire 20cm
        • 1x Standoff pack






        Raspberry Pi Pico Header Compatibility




        Onboard Voltage Translator





        Pinout Definition




        Dimensions



        Write a review

        Note: HTML is not translated!
        Bad Good
        Captcha