5.79inch e-Paper Module (G), e-ink display, 792x272, Red/Yellow/Black/White, SPI Interface

5.79inch e-Paper Module (G), e-ink display, 792x272, Red/Yellow/Black/White, SPI Interface

The 5.79-inch e-Paper Module (G) is a versatile and energy-efficient e-ink display designed for various applications that require clear and readable output with low power consumption. Featuring a 792x272 resolution, this module supports four colors: red, yellow, black, and white, providing vivid and sharp visuals. Its SPI interface ensures easy integration with a wide range of microcontrollers and development boards.

User Manual / Datasheet / Example Codes Etc.

Features

• No backlight, keeps displaying last content for a long time even when power down
• Ultra low power consumption, basically power is only required for refreshing
• Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Series/Arduino/STM32)

Specifications

• OPERATING VOLTAGE: 3.3V/5V
• DISPLAY COLOR: Red/Yellow/Black/White
• RESOLUTION: 792 × 272 pixels
• INTERFACE: 3-wire SPI, 4-wire SPI
• GREY SCALE: 2
  
• OUTLINE DIMENSIONS: 152.50 × 58.50mm
• FULL REFRESH TIME: 21s
• DISPLAY SIZE: 139.00 × 47.74mm
• REFRESH POWER: <30mW
• DOT PITCH: 0.1755 × 0.1755mm
• STANDBY CURRENT: <0.01uA (almost none)
• VIEWING ANGLE : >170°

Package Includes

• 1x 5.79inch e-Paper Module (G)
• 1x GH1.25 9PIN cable 20cm

Onboard SPI Control Interface

• PWR: Power on/off control
• BUSY: Busy status output pin
• RST: External reset, low active
• DC: Data/Command selection (high for data, low for command)
• CS: SPI chip selection, low active
• CLK: SPI SCK pin
• DIN: SPI MOSI pin
• GND: Ground
• VCC: Power (3.3V / 5V input)

Usage Example

Connecting With Raspberry Pi 5

Dimensions